How to build wall bookshelves

How much does it cost to build built in bookshelves?

The cost to have built-in bookshelves installed averages $2,555 or between $1,252 and $3,943 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour.

How deep should Built in bookshelves be?

11 to 12 inches

Do Built in bookshelves increase home value?

Whereas furniture usually leaves with the homeowner when they sell the house or move, built ins remain. This is why they can increase home value. Built in bookshelves are also a great way to include very creative and personal design elements in the home while simultaneously maintaining a neutral backdrop for resale.

Is it cheaper to build or buy shelves?

Building your own shelves can be beneficial for some, but may not be the right choice in every situation. The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.8 мая 2015 г.

What is the best wood to build a bookcase?

Plywood that has a hardwood veneer is not only less expensive but in many cases stronger than solid softwoods like pine. Most lumberyards stock the basics: birch, maple, and oak veneer plywoods. Birch is the best wood to use if you plan to paint your bookcase, and maple lends itself to a variety of stains.

How tall should bookshelves be?

The highest shelf in a bookcase should be as high as an average-sized person can comfortably reach – about 72 to 78 inches. If the shelves will be accessed from a sitting position, the highest shelf should be no more than 60 inches above the floor. The lowest shelf should be 3 to 4 inches from the floor level.

You might be interested:  How to build concrete block wall

How wide can shelves be without support?

Thickness and Sizes

Use 3/4-inch thick materials for shelves and bookcase structure. … Bookshelf width is typically no more than 12 inches. If the space is limited, the shelf can be reduced to 9 inches. Single bookcase units with two sides, top and bottom should be no wider than 36 inches without a center support.

What depth should Shelves be?

16 to 20 inches

Are built in shelves expensive?

Cost to Install Built-in ShelvingBuilt-in Shelving CostsNational average cost$3,000Average range$1,500-$4,000Minimum cost$800Maximum cost​$5,000

Are built ins worth it?

If you simply need more storage, space to display items, or room to house equipment, it’s understandable to look at built-ins. They’re sturdy, they can support a great deal of weight, and they’ll probably add to the value of your home. That said, built-ins can also become a problem if they’re not placed with care.

What are built ins?

Built-ins are any items that do not leave the property but remain a part of the permanent structure of a home. This includes any type of permanent appliances, cabinetry, furniture that’s built into the home, such as shelving or benches, and other attached items.

How do you join bookshelves?

Place three C-clamps spanning across both bookcases evenly spaced vertically from top to bottom. One side of the clamps will fit in one bookcase, and the other side will fit into the other bookcase. Tighten the clamps securely to bond the two bookcases together.

How do you remove built in bookshelves?

Using the hammer, hit the underside of each shelf to remove them. Once the shelves are removed you then hit the inside of the vertical side, start at the bottom, once you have loosen the side use the pry bar to pull off the vertical sides, do this slowly to avoid further damage to the ceiling and/or floor.

Leave a Comment

Your email address will not be published. Required fields are marked *