How to build split rail fence

What is the best wood to use for a split rail fence?

Western Red Cedar

Should split rail fence posts be set in concrete?

The heartwood will last many years longer in ground contact than any other wood species, including PT. Don’t set them in concrete, just backfill with soil.

How long does a split rail fence last?

15 years

How tall can a split rail fence be?

2 rail fence is about 3′ high at the top rail. Most 3 rail posts are 7′ long (A 3 rail western red cedar post is 6.5′ long). Most 2 rail posts are 6′ long (A 2 rail western red are 5’4″). Split rail fence is rough cut so the exact dimensions vary, but line posts are approximately 3” x 6” x 7′ long.

How much does it cost to have a split rail fence installed?

To fence in a square acre, it will cost between $3,320 and $9,960 in materials for the approximate 830 feet of fencing needed. With professional installation, a split rail fence will cost you from $12 to $30 or more per linear foot, $1,200 to $3,000 per 100 feet, and $9,960 to $24,900 to enclose an acre.

How do you shorten split rails?

Take the cut end piece and use it to mark the “wedge” on the shortened rail. 3.) Take a wide blade chisel and scribe all along the top and bottom of the outline. Then take and start the split from the end with the chisel.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

You might be interested:  How to build a flower wall

Do fence posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

How do you secure a fence post without concrete?


  1. Find a concrete surface and lightly tamp your digging iron against it. …
  2. Remove the turf and topsoil from the site of the post. …
  3. Dig the hole putting the displaced earth onto the tarp. …
  4. Pour 4 inches of gravel into the hole.
  5. Place the post in the hole. …
  6. Add another 2 inches of gravel around the base of the post.

8 мая 2015 г.

Does painting a fence make it last longer?

Painting or staining a wood fence can help your fence last longer and look better. Either one will extend the lifespan of your fence by giving it some protection against rot, insects, wear, and tear. … Paint doesn’t allow the cedar to breathe, which means you’ll actually reduce the lifespan of the fence.

Can you paint split rail fence?

A split rail fence must be completely coated to prevent mildew, fungus and rot from setting in. If you leave the tiny holes or fissures uncovered, the finish will not protect the wood. Never attempt to paint a split rail fence without priming first or the finish will flake and peel.

How do you treat a split rail fence?

Our 7 tips for maintaining your split rail fence include:

  1. Use pressure-treated wood.
  2. Stain the wood regularly.
  3. Keep plants and grass away.
  4. Use Fence Armor.
  5. Choose vinyl for low maintenance.
  6. Do repairs immediately.
  7. Regular inspections reduce common problems.
You might be interested:  Donald trump do you want to build a wall

Does Lowes sell split rail fencing?

Wood Fencing 11′ Split Rail at

How tall should a post and rail fence be?

48 inches

Leave a Comment

Your email address will not be published. Required fields are marked *