How to build garage shelves on a wall

How do you build shelves in an existing wall?

How to do it

  1. Make an Inspection Hole. Locate studs with a stud finder. …
  2. Cut Drywall. Measure how tall you’d like to make your shelf (we made ours 16 x 16 inches) and how high up you’d like it to be installed. …
  3. Build Box Sides. Cut small sheet board and craft board to dimensions of interior shelf. …
  4. Apply Putty. …
  5. Insert Shelf.

30 мая 2017 г.

How deep should garage shelves be?

Shelves should be deep enough to safely store items, yet not so deep that items will get hidden behind each other. For a garage, 16” depth is ideal for the storage of large items and 12” depth is ideal for smaller items. Adjustability is very important to maximize the use of space.

How do you make built in shelves between studs?

Draw level lines between the studs and use a drywall keyhole saw to cut to the edges of the studs. Then saw along the studs and remove the drywall. Before you buy materials, choose the location for your built-in cabinet and cut the hole. Then you can adjust the dimensions if your wall studs aren’t exactly 14-1/2 in.

Is it cheaper to build or buy shelves?

Building your own shelves can be beneficial for some, but may not be the right choice in every situation. The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.8 мая 2015 г.

You might be interested:  Build a retaining wall with pavers

What is the best garage shelving?

So here is my list of The 10 Best Garage Shelving Units.

  • AmazonBasics 5-Shelf Garage Shelving. …
  • Edsal 4000 lb. …
  • Seville Classics 5-Tier Steel Wire Garage Shelving. …
  • HyLoft Wall Garage Shelving. …
  • Hopkins Workbench and Garage Shelving. …
  • Meet Perfect Heavy Duty Metal Garage Shelving. …
  • Sandusky Lee Plastic Garage Shelving.

What is a good shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

How much weight can a 2×4 shelf hold?

1,000 pounds

How do you attach 2×4 to a wall?

You can locate the studs with a magnetic stud finder (nails), and nail the 2X4s to them with finishing nails sunken with a nail punch and hidden with wood putty, or drill thorugh the 2X4s, screw them to the studs, and plug the screw holes with wooden dowel plugs, and sand, paint or stain to suit.

Leave a Comment

Your email address will not be published. Required fields are marked *