How to build a wooden privacy fence gate

How wide should a fence gate be?

Standard sizesYour Driveway WidthSuggested Gate Size10′ gate9′ 7” – 11′ 9”12′ gate11′ 10” – 13′ 9”14′ gate13′ 10” – 15′ 9”16′ gate

Can I use a fence panel as a gate?

Tip. While you’re free to make the gate as large or as small as you like, most single gates measure 4 to 5 feet wide. … Fortunately, you can use an extra fence panel to build your own custom gate for a fraction of the cost. Wood fence is easy to cut and alter, so creating a gate out of the fence is actually fairly simple …

How much space should be between post and gate?

For gates with standard 2×4 framing and 4×4 posts, leave a 1/2- to 3/4-inch space between the latch post and the gate frame. On the hinge side, it will depend on the hardware you use. About 1/4 inch is usually sufficient.

Should a wood gate open in or out?

A gate should always swing inward toward private space, not outward toward public space. The hinges can be placed on either side of a single gate. If the gate will swing into a sloping hillside, mount the hinges on the downhill post.

What is the best wood to make a gate?

As for wood choice, your best bet is a rot-resistant species (cedar, redwood, teak, mahogany).

  • Cedar wins because teak is very expensive and has a high waste factor.
  • Redwood should be used only if it is recycled old-growth lumber.
  • Less-resistant mahogany needs a finish coating.

14 мая 2019 г.

Leave a Comment

Your email address will not be published. Required fields are marked *