How to build a simple retaining wall

What is the easiest retaining wall to build?

While retaining walls of this type are relatively inexpensive, they can be difficult to repair or remove. For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members.

How should a retaining wall be built?

retaining wall blocks

  1. Step 1: Dig the Trench.
  2. Step 2: Create a Building Base.
  3. Step 3: Lay the First Course of Blocks.
  4. Step 4: Build the Additional Courses.
  5. Step 5: Finish the Retaining Wall.

What can I use instead of a retaining wall?

An alternative to retaining walls are typically metal mesh gabion baskets filled with stones. These present different options for introducing creative elements to your garden and landscaping. Garden walls with stone embankment – plantable. This is a great combination of design and functionality.

What type of retaining wall is best?

Timber and inter-locking-concrete-block walls are great DIY retaining wall ideas. Mortared masonry and poured concrete ones are usually best left to a mason.

Does a 2 foot retaining wall need drainage?

Second, a retaining wall must have properly compacted backfill. … In order to provide proper drainage, at least 12 inches of granular backfill (gravel or a similar aggregate) should be installed directly behind the wall. Compacted native soil can be used to backfill the rest of the space behind the wall.

WHY DO Retaining walls fail?

The reasons for these types of failures are lack of proper reinforcement, improper drainage behind the wall (lack of weep holes or clogged holes), foundation footing problems, settlement or expansion of the soil, overloading of the wall, construction errors, and/or other design errors.

You might be interested:  Build stone retaining wall

How deep should a footing be for a retaining wall?

The general rule of thumb is to bury about one-eighth of the height of the wall. For example, if your wall will be three feet (36 inches) tall, the first course of blocks should start five inches below soil level. The gravel base should start three inches below this.

What is the cheapest wall to build?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material. …
  • Hardwood is more expensive than treated pine. …
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

What slope requires a retaining wall?

A few things to keep in mind are: What is the slope? If the slope is greater than a 3:1, consult with an engineer. If the slope is over 2:1, it will require structures or special stabilization techniques.

How many blocks do I need for retaining wall?

To estimate how many blocks you’ll need per row, divide the total length of the wall by the length of the block. To figure out how many rows you’ll need, divide the ideal wall height by the height of the block. Make sure to account for the first row being half-buried.

How do you install a retaining wall on a slope?

  1. Place the drain pipe at the lowest possible point toward the back of the trench.
  2. Place a minimum of 6 in. …
  3. Excavate the second step up making sure to accommodate for the base material and buried block. …
  4. Place the base course of blocks on the base material and check for level.
  5. Fill the hollow cores and 12 in.
You might be interested:  Build garage wall shelves

Does a retaining wall need a footer?

A concrete footing serves as the foundation of many construction projects. … If you plan to use brick, cinder block or stone that will include the use of mortar, then a concrete footing is recommended. If you are building a segmental retaining wall, then you will not need a footing.

Leave a Comment

Your email address will not be published. Required fields are marked *