How to build a curved retaining wall on a slope

How do you build a retaining wall on a slope?

  1. Place the drain pipe at the lowest possible point toward the back of the trench.
  2. Place a minimum of 6 in. …
  3. Excavate the second step up making sure to accommodate for the base material and buried block. …
  4. Place the base course of blocks on the base material and check for level.
  5. Fill the hollow cores and 12 in.

How do you build a retaining wall with uneven ground?

Place the first paver stone into the trench at one end. Position the paver so that the front edge is 3 inches away from the front of the trench. Lay a level on top of the paver, going front-to-back and side-to-side. If the paver is uneven, tap it down with a rubber mallet until it is level in both directions.

What is the easiest retaining wall to build?

While retaining walls of this type are relatively inexpensive, they can be difficult to repair or remove. For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members.

What is the cheapest type of retaining wall?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material. …
  • Hardwood is more expensive than treated pine. …
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

Does a 2 foot retaining wall need drainage?

Second, a retaining wall must have properly compacted backfill. … In order to provide proper drainage, at least 12 inches of granular backfill (gravel or a similar aggregate) should be installed directly behind the wall. Compacted native soil can be used to backfill the rest of the space behind the wall.

You might be interested:  How to build a curved wall drywall

Does a retaining wall need a footer?

A concrete footing serves as the foundation of many construction projects. … If you plan to use brick, cinder block or stone that will include the use of mortar, then a concrete footing is recommended. If you are building a segmental retaining wall, then you will not need a footing.

How do you level a sloping yard?

How to level a sloping garden

  1. Make sure you have permission.
  2. Measure the rise and run of the slope.
  3. Water the ground you’ll be digging.
  4. Build the retaining wall.
  5. Pile up soil behind the retaining wall.
  6. Ensure the new lawn is level.
  7. Compact the soil.
  8. Plant a new lawn.

What type of retaining wall is best?

Timber and inter-locking-concrete-block walls are great DIY retaining wall ideas. Mortared masonry and poured concrete ones are usually best left to a mason.

What do you put under retaining wall?

Base Material

The base material should only consist of angular, sharp edged particles such as ¾ minus gravel. The various sized crushed gravel with the fines helps ensures for appropriate compaction. Round rocks such as pea gravel rolls and dislodge under pressure resulting in failure of the retaining wall.

What is the best retaining wall system?

VERSA-LOK retaining wall systems are cost-effective, easy-to-install, and give you endless design options. VERSA-LOK segmental retaining walls are made from high-strength concrete units, dry-stacked, interlocked with pins, and set on granular leveling pads. These mortarless walls do not need frost footings.

How long will a sleeper retaining wall last?

Expect them to last about as long as treated hardwood sleepers. HR5 (highly water and pest resistant) treated pine sleepers are estimated to last for up to 20 years. Treated hardwood sleepers are estimated to last between 7 and 10 years. Used railway sleepers have been treated with creosote.

Leave a Comment

Your email address will not be published. Required fields are marked *