Build bookshelves on wall

How much does it cost to build built in bookshelves?

The cost to have built-in bookshelves installed averages $2,555 or between $1,252 and $3,943 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour.

How do I build a bookcase wall?

Bookcase Plans

  1. Step 1: Mark and Drill. Mark location for fixed shelves and drill shelf pin holes for adjustable shelves. …
  2. Step 2: Install fixed shelves to one side. …
  3. Step 3: Attach second side. …
  4. Step 4: Install cleats. …
  5. Step 5: Attach back. …
  6. Step 6: Build Cabinet Base. …
  7. Step 7: Configure and Install Bookcases. …
  8. Step 8: Install Faceframe.

How deep should Built in bookshelves be?

11 to 12 inches

Is it cheaper to build or buy shelves?

Building your own shelves can be beneficial for some, but may not be the right choice in every situation. The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.8 мая 2015 г.

Do Built in bookshelves increase home value?

Whereas furniture usually leaves with the homeowner when they sell the house or move, built ins remain. This is why they can increase home value. Built in bookshelves are also a great way to include very creative and personal design elements in the home while simultaneously maintaining a neutral backdrop for resale.

You might be interested:  How to build a curved wall drywall

What kind of wood should I use for a bookshelf?

Plywood that has a hardwood veneer is not only less expensive but in many cases stronger than solid softwoods like pine. Most lumberyards stock the basics: birch, maple, and oak veneer plywoods. Birch is the best wood to use if you plan to paint your bookcase, and maple lends itself to a variety of stains.

What is a good shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What depth should Shelves be?

16 to 20 inches

How wide can shelves be without support?

Thickness and Sizes

Use 3/4-inch thick materials for shelves and bookcase structure. … Bookshelf width is typically no more than 12 inches. If the space is limited, the shelf can be reduced to 9 inches. Single bookcase units with two sides, top and bottom should be no wider than 36 inches without a center support.

How do you make cheap bookshelves look expensive?

Add Molding to Make It Look More Expensive

Fine furniture is usually finished with as much trim and molding as the style allows. Thus, you can make a cheap bookcase look more expensive by adding molding—even if it starts as an everyday laminate piece.

How do you attach bookshelves together?

Join the two bookcases together

Attach the pieces together by using screws at the front, then cover the back of the two shelves with ¼” plywood. Be sure to place the newly combined piece on the floor so that the back is facing up for the next step.

Leave a Comment

Your email address will not be published. Required fields are marked *